Parts & Accessories
Low Road position places the computer in front of the bar and nearly flush with the top of the bar, making for an easy to read display whether you are on the hoods or in the drops. - Sub-20 gram computer mount - Compatible with computers with 1/4 turn twist lock interface and 31.8mm bar surface - Single Torx T25 fixing bolt
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Aerodynamic dual-bottle BTA hydration system that features a dynamic, multi-position computer mount to accommodate your changing needs. Raise the computer mount up to tuck in a refill bottle for race day, or lower it down for a standard bottle while maintaining the optimal view for training days. - Telescoping Garmin mount features on-the-go tilt adjust to avoid glare. - Zero-leak design with a sealed viewing window to easily monitor liquid levels, and a leak-free Dolphin Breather Valve that lets air in but doesn't let water out. - Capacity: 26oz (768 mL) - Material: Plate: 6061-T6 Aluminum - Cage: Nylon Composite Vee Cage - Computer Mount: Nylon Composite - Bottle: Lead free, BPA-Free and HDPE food safe certified bottle - Brackets: Nylon composite with Velcro straps coated with no-slip extension grip - Adjustment Width: 75-150mm - Weight: 9.3oz (265g)
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
Enjoy easy viewing with the Butler Out Front handlebar mount! Out Front Mount for following models: BC 1909 STS BC 2209 STS ROX 5.0 ROX 6.0 ROX 8 ROX 8.1 ROX 9 ROX 9.1 *Note: not for use with ROX 10.0
$3.50 - $31.50
CR2032 Lithium 3V battery for SIGMA computers, heart rate monitors, transmitters, and Micro Lights. Compatible with: - PC3 - PC4 - PC9 - PC15 - Shape watch - FIT watch - Onyx series HRM's - PC 25.10 - PC 3.11 - PC 10.11 - PC 15.11 - PC 22.13 - RC 1209 - RC 14.11 - RC Move - Micro Lights Not Compatible with: - ROX computers - BC 1909 - BC 2209 - BC 23.16
Replacement handlebar/stem mount for wireless CR 2450 computers. Compatible devices: ROX 8.0 ROX 9.0 ROX 8.1 Rox 9.1 BC1909HR BC2209MHR ROX 5.0 ROX 6.0
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Connect your PC to CycleOps VirtualTraining.
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter
SRAM's BlipBox is the control module that turns your triathlon or time trial machine into a wireless missile. Connected to SRAM RED eTap Blip remote shifters, the BlipBox manages the wireless shifting via AIREA, SRAM’s proprietary communication protocol, allowing immediate shifts from nearly any aero position. - BlipBox mount included - Replaces standard drop bar shift levers - Limitless aero configurations - Up to two positions per side - Fits a standard Garmin mount or the included mount
Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap
SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes up to 60 minutes to complete.The eTAP Powerpack includes a battery charger, cord, transmitter, and international adaptors (US/EU/GB).
Significantly smaller, the SRAM eTap AXS BlipBox is now easier to integrate — mounting inside a stem faceplate cap, feed box, or frame. It's also AXS enabled, for easy personalization. Simple, intuitive, aero. - Replaces standard drop bar shift levers - Simple and intuitive eTap shift logic - AXS enabled for easy personalization - Limitless aero configurations - Two ports per side for Blips - Fits the included optional stem mount - Compatible with existing eTap Blips and Clics - Mounts inside stem faceplate cap, feed box or frame
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
- Use to keep Blips in place on handlebars - Fits 31.8mm round portion of drop bar - Clamp mounts directly to bar outside of tape zone - Ideal for use with thumbs or index fingers while hands are on the tops - Right and left specific, just like Blips - Weight: 12 grams (for pair) - Material: Polypropylene - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
External Blip mount for aero extensions and base bars - 360 degree rotation for adjustment - Aero use only to fit 22.2mm OD bar 65mm in length - Fits all Zipp aero extensions and base bars - Blips not included - Weight: 57 grams for pair (does not include Blip) - Material: Polypropylene + TPE - Compatibility: 11-speed - Recommended Group: SRAM RED eTap
- For charging batteries in European countries
Rokform's Samsung Galaxy Bike Mount is a rock solid system that is completely adjustable, offering stable, safe, and completely hands-free visibility and access to your Samsung Galaxy. Rokform's CNC-machined aluminum-billet case provides a light, tough landing pad for your phone. And, their Universal V.3 Bike Mount replaces your stem cap to quickly attach to any 1-1/8-inch fork. The mount's viewing angle adjusts from -22 to +55 degrees, so you're sure to find the perfect perspective. The included safety lanyard offers another layer of security for your phone. The kit also includes Rokform's V.3 Magnet Kit, which lets you stick your phone to any magnetic surface, and their RokSack all-weather protective cover. Samsung Galaxy Bike Mount for S3, S4 and S5 includes: • Machined 6061 T-6 aluminum billet phone case • Universal V.3 Bike Mount • V.3 Magnet Kit • RokSack weather-guard protective cover • Dual retention locking system
Rokform's iPhone Bike Mount is a rock solid system that is completely adjustable—offering stable, safe, and completely hands-free visibility and access for your iPhone. Rokform's CNC-machined aluminum-billet case provides a light, tough landing pad for your phone. And, their Universal V.3 Bike Mount replaces your stem cap to quickly attach to any 1-1/8-inch fork. The mount's viewing angle is adjustable from -22 to +55 degrees, so you're sure to find the perfect perspective. The included safety lanyard offers another layer of security for your phone. The kit also includes Rokform's V.3 Magnet Kit, which lets you stick your phone to any magnetic surface, and their RokSack all-weather protective cover. iPhone Mount for 6, 5/5s, 5c, 4/4s includes: • Machined 6061 T-6 aluminum-billet phone case • Universal V.3 Bike Mount • V.3 Magnet Kit • RokSack weather-guard protective cover • Dual retention locking system
Fits Cranks Produced After 1-8-15
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Spare hose kit for Quarq's ShockWiz automated suspension tuning device. - Contains one of each hose type and four zip ties.
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle
Page 1 of 5 Next page