Parts & Accessories

Replacement plastic insert kit for K-EDGE Wahoo Mounts. The co-polymer insert for Wahoo 1/4-turn style computers is a replaceable item. While it is extremely strong, it is designed to fail on a significant impact before the tabs on the back of the Wahoo break. Attributes (specs): – Qty 1 – K-EDGE Co-polymer Insert for Wahoo 1/4 Computer (Part No. K13-1604) – Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

The K-EDGE co-polymer insert for Garmin 1/4 Turn style computers is a replaceable item. While it is extremely strong, we designed this insert to fail on a significant impact before the tabs on the back of the Garmin break. - Qty 1 – K-EDGE Co-polymer Insert for Garmin 1/4 Computer (Part No. K13-503) - Qty 2 – M3 x 0.5mm x 6mm with Pre-Applied Nylon 180,18-8 S.S. Screws

Cadence Magnet for all CatEye computers that record cadence.

The Under Stem Mount allows riders to secure a Shimano Di2 Junction Box to their bike quickly and easily without the need for zip ties, duct tape, or other unreliable attachments. - Lightweight alloy headset spacer with nylon body (9g) - Compatible only with Shimano Di2 Junction Box - 95mm length, 44mm width, 6mm height - 6 Degree angle

- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries

Protect your Garmin Edge 510 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.

Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.

- Machined protective case that houses the Apple AirTag under your saddle. Apple AirTag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Compatible with some saddle bags - Mounts to saddle rails

Protect your Edge 1030 with this form-fitting, removable silicone case.

- Machined protective case that houses the Apple AirTag on the bottle cage mount. Apple Air Tag sold separately - Casing is not waterproof but the Apple AirTag is rated IP67 (water resistant) - Removal key for T25 bolts security bolts included - Fits discreetly under a water bottle cage or mounted to accessory top tube bolts

The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Monitor your speed as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel. You can set up wheel size in our Garmin Connect online community or self-calibrate with an Edge cycling computer or compatible Garmin device. Once set up, you’ll get accurate speed and distance at all times — even without a head unit. ANT+ connectivity and BLUETOOTH Low Energy technology let you sync to Garmin Connect and other training apps, compatible devices and fitness equipment for better data when you ride indoors and outdoors.

Monitor your pedaling cadence as you ride with this easy-to-install wireless sensor. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes. Simply attach the sensor and ride. With no magnets or other exposed parts to line up, this sensor is easy to install, maintain and move between bikes.

Stay ahead of the pack with Garmin's Out-front Bike Mount that lets you to take full advantage of your Edge's capabilities without compromising your ride. The mount positions your device for easier monitoring and safety. Also compatible with the Forerunner 910XT and 310XT when used with a quick-release kit (sold separately).

This mount was made specifically for Trialists and Triathletes. You can easily attach your Edge cycling computer and quarter-turn accessories to TT bars.

Versatile GPS and accessories forward mount. Multiple mounting options to maximize GPS and accessories placement. Composite matrix construction with aluminum arms. Bolts directly to stem faceplate. Lezyne X-Lock and GoPro mount compatible. Includes mounting hardware. - Direct X-Lock Mounting System not compatible with all stems.

The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes

SRAM eTap batteries are literally a snap to remove and charge. Just flip the tool-free battery latch up and slide the battery up and out of the derailleur. Then snap the battery into the USB powered charger and connect the charger to any USB power source or A/C USB adaptor. A full charge takes just 45 minutes to complete. - Finish: Black - Compatibility: SRAM RED eTap

SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap

CatEye's Bluetooth Speed/Cadence Sensor transmits your speed and cadence through your Bluetooth-compatible Smartphone to your handlebar-mounted CatEye Strada Smart cyclo-computer (sold separately). Download the CatEye Cycling app for iPhone/Android and you’ll get all your ride data and save your phone battery. Attack each ride and celebrate your successes on the bike!

The strongest K-EDGE Mount yet, designed for today’s heaviest computers, cameras and lights. Upgrade to the Garmin Max Combo mount for a solid and clean platform for your cycling electronics. Chosen by the best, year after year, when quality, performance and craftsmanship matter. - Max XL combo mount is compatible with all Garmin Cycling Computers - Combo Mount (Computer on top – light or camera underneath) with GoPro style light/camera interface - GARMIN approved replaceable computer insert protects computer tabs - CNC Machined Aluminum, Anodized Black with laser etched logos - Made in-house, Boise, Idaho USA with a Lifetime Warranty - Weight: 63g

Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.

Made in the USA by the bike computer mount experts K-Edge, this Wahoo, Garmin, and GoPro compatible computer mount is made specifically for the ENVE Carbon Road Stem. The ENVE Combo Computer Mount integrates seamlessly with your ENVE Road Stem and opens up the possibility to accessorize your ride with a computer, light, and/or camera combo. This mount is made in the USA by the experts at K-Edge, and is compatible with all available K-Edge accessory mount inserts. FEATURES - Manufactured in the USA by K-Edge - Multiple Computer Mount Options - Multiple Light and Camera Options COMPATIBILITY - Wahoo - Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20

What It Is A computer mount, with inserts for Garmin or WAHOO cycling computers, for exclusive use with ENVE Aero road stems. This mount also includes the combo upgrade to add a GoPro camera. Compatible with the following Garmin Models: 1030, 1000, 820, 520, 510, 500, 25, 20. Who It's For Cyclists using the ENVE Aero Road Stem and a Garmin or WAHOO cycling GPS computer. Why We Made It We wanted to create a clean and integrated solution to mounting a Garmin or WAHOO GPS cycling computer without having to clamp it to our handlebars. In the case of the ENVE Aero Road and TT bar it is impossible to clamp anything to the handlebar itself. The ENVE Computer Mount, mounted to the ENVE Aero Road Stem, is ready to mount both Garmin and WAHOO right out of the box.

Cutting edge aerodynamic and lightweight mount 3D Printed in Titanium compatible with all Garmin and Wahoo computers (except bolt v1). T-Tray mounting system makes for a removable mount for lights, cameras, and more! - Standard: 9 – 30mm - Wide: 23 – 40mm

EPS cable kits come in multiple options that allow for the mounting of the power unit beneath the bottom bracket or beneath the saddle. - Weathertight o-ring sealed connectors - Fitting the V4 internal interface to the frame requires 1 cabling from the interface to the Erogopower controls - 900mm from the interface unit to the splitter - 800mm from the splitter to the Ergopower controls

Be it the fireworks of a finale, an ideal rhythm, climbing on the top, or a deep, dark place extracting the last kilojoule of effort on your bike split, you want to adjust your gear with the twitch of a finger. eTap Blip satellite shifters allow you to shift when you want, where you want. - Limitless remote shifting positions for drop and aero bars - Wired shift buttons can be positioned however the rider prefers - Connect to Blip Box or drop bar eTap levers - Compatible with SRAM RED eTap shift/brake controls

- Shift buttons mounted to the end of a bar plug - Included wire connects to Blip Box - Fits bars with 19 - 20.5mm inside diameter

Our top-selling wireless sport headphones formerly known as Aeropex now come with new packaging, a quick-charge feature, and a new name. OpenRun are our lightest headphones to date and are engineered with outstanding sound, a long-lasting battery, and Quick Charge to keep you aware and motivated while you power through any workout. - 8th Generation Bone Conduction Technology - IP67 Waterproof (Not for swimming)  - Lightweight + Comfortable - 8-Hour Battery Life + Quick Charge