Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.
Truvativ's BashGuard keeps your chainring(s) safe. It is designed to work with their BoxGuide chain guide (sold separately) for complete chain management. It's made from tough polycarbonate to take freeride and downhill abuse, and it's 4 bolt, 104 BCD compatible.
$13.99 - $19.99
• Square taper interface • Only includes left crank
• Square taper interface • Only includes left crank • 175mm length
- Sunlite Cottered Pins
The Stages Power meter is built on to a non-drive FC-6800 crank arm specifically to pair with Shimano's Ultegra 6800 crank. The new Stages Power meter is slimmer, and up to 28% lower profile than the original meter. It's sleeker by way of a 17% reduction in frontal area, and they've also made it stronger. The new housing design increases the strength of the battery door and housing connection by 200% over the previous design. This Shimano Ultegra 6800 Stages Power meter is compatible with all Shimano Hollowtech II road drivetrains. - Accuracy: ± 2% - Power meter housing: new low profile design, with new door interface - Weight: Only adds 20g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 - Frame Compatibility: Most frames, see fit guide in the Support section - Device Compatibility: ANT+, Bluetooth Smart Ready Software - Compatibility: Training Peaks, Strava, Garmin Training Center and others
$136.99 - $229.99
For maximum pedaling efficiency, Shimano's 105 Compact Crankset boasts light, strong and stiff hollow, cold forged-aluminum arms, plus an integrated oversize-steel axle. The compact chainrings are also made of cold-forged aluminum and are ramped and pinned for quick, precise shifting.
The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD
$213.99 - $299.99
Shimano's Deore XT Dyna-Sys 10-Speed Crankset boasts race-worthy efficiency. Shimano incorporates the crankarms and the bottom bracket spindle into a single unit so you shave grams without losing a drop of valuable pedal power. The 38/26 ratio gives you less overlap of gears, making for more efficient shifting and pedaling, especially with full-suspension bikes. This design also sports external bottom bracket bearings that increase rigidity and durability.
$128.99 - $137.99
Shimano's Tiagra Front Chainwheel is sleek, balanced and consistent. The Tiagra 4700 series provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Series: Tiagra 4700 - Crank Construction: 2-piece crank construction - Cassette Compatibility: 10-speed - Chain Compatibility: Series color - Bottom Bracket: BB-RS500 / BB-RS500-PB
$237.99 - $359.99
Shimano's Ultegra Compact Crankset boasts hollow-forged-aluminum arms and a hollow aluminum big ring. These technologies combine for impressive weight savings and superb strength. An integrated bottom bracket axle provides super-efficient power transfer, while chainrings with ramps, pins and notched teeth deliver lightning-quick shifting.
$270.99 - $279.99
Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)
$123.99 - $139.99
Super strong and ultra durable, Shimano's ZEE Cranks are tailor-made for aggressive riders, DHers and dirt jumpers that don't have endorsement deals. They use a 2-piece design with solid aluminum arms as well as a steel axle and steel pedal inserts for longevity. Stiffness was put at a premium, so if you need to stomp on the pedals to get up to speed quickly, or if you're a Clydesdale who punishes lesser cranksets, ZEE has your back. It's 10-speed compatible and is equipped with a 36-tooth chainring. The bottom bracket is included, too.
$254.00 - $314.00
Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included
Riders want more range and closer steps between gears—and that’s the driving design principle of the SRAM Force crankset. It offers smaller chainrings with a consistent 13-tooth gap between size variants, delivering smooth, accurate, and dependable shifting for the modern rider. Always find the sweet spot. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Crisp and accurate front shifts - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter
$181.00 - $219.00
SRAM's GX-1400 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX single-chainring crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Open Core and X-Sync Technology - CNC machined 7075, two-tone anodized X-Sync chainring (30/32T) - Weight: 680g (GXP, 175mm, 32T)
Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1
The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included
The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today’s riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean, and quick—every time. - X-Range gearing technology gives you more range and a smoother gear progression, so you’re always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity, and broad compatibility - Can be upgraded to a power meter - Version: D1
$299.99 - $344.99
SRAM's X1 Crankset takes a less-is-more approach to mountain biking shifting. Paired with SRAM's 1x11-speed parts (sold separately), you get the gearing of a double or triple drivetrain, with greater simplicity, less noise, and reduced weight. There's less clutter on your bars without a front shifter and cable, and dropped chains and chainguides are a distant memory thanks to the ingenious X-Sync chainring teeth that hold your chain. On top of all that, the cranks themselves are seriously light thanks to the forged aluminum arms and spider. Experience less with X1, because less is more.
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
FSA's Gossamer 386Evo Pro Crankset features cold-forged aluminum crankarms for low weight and strength, as well as ramped and pinned CNC chainrings for fast, reliable shifting. The 386Evo bottom bracket design provides compatibility with nearly every frame or bottom bracket standard with the correct adapter (sold separately). This crankset is compatible with all 10- and 11-speed road drivetrains.
$43.95 - $44.99
Aluminum bash guard.
The design of the four arm carbon fiber cranksets that so well identify the Super Record, Record and Chorus groupsets has also found its way into the fantastic Campagnolo Potenza 11 drivetrain, albeit in an aluminum construction. The Potenza crankset is made with both left and right crank arms in hollow forged aluminum to keep weight to a minimum while maintaining the same performance characteristics of its carbon fiber counterparts. Potenza’s four arm spider design makes for one single crankarm for all chainring options thanks to its unified bolt pattern which allows for all three chainring standards 53/39, 52/36 and 50/34 to be built upon the same crankset. Changing between compact and standard with the Potenza groupset is as easy as changing eight bolts and two chainrings. While the 4-arm bolt pattern offers advantages in terms of practicality, the Campy Tech Lab designed it primarily with performance characteristics in mind. The eight bolt pattern with a spider arm design that not only holds the chainring in place by way of the bolt but also supports the chainring and in doing so, increases system rigidity to the point of surpassing its direct competitors in laboratory tests. -Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings -Power-Torque system have drive-side bearing pre-installed. The non-drive bearing comes pre-installed in the bottom bracket cup -Power-Torque Plus system utilizes a self extracting crank bolt for easy disassembly -Requires use of Power-Torque bottom bracket cups -Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain -Power-Torque system uses a single piece axle fixed to the drive-side crank arm which allows for simplicity and a light weight and rigid axle
- Stiff oversized hollow-forged aluminum arms for frames with PF30 or BB30 BB shell - Innovative Praxis 35mm external bottom bracket and oversize aluminum spindle - Includes an aluminum BB30/PF30 bottom bracket with precision sealed bearings
- Service parts for E-13 chainguides - Fits: 06+ single ring guides
- Lower slider replacement parts for E-13 chainguides
- Adapts ISCG-05 mount chainguide arms to fit flange or lockring style bottom brackets
Page 1 of 7 Next page