Filter By:
- Lubes/Cleaners (22)
- Tools (37)
- Workstands (2)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Tools/Maintenance

$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

$32.95
The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool.
- Weight: 38.5g
- Size: 116 mm x 20 mm x 9 mm
- Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains
- Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

$47.25
BB30 service kit for SRAM DUB cranks.
- Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips
- Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm
- Enduro ABEC-3 bearings
- Use with SRAM DUB cranks
Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.

$9.99
WD-40's Wet Lube is the perfect bicycle lubricant for riding in wet and muddy conditions. Their exclusive formula has been tested and proven by mechanics and cyclists and is amped up for premium lubrication. Wet Lube improves shifting and extends the life of your chain and drivetrain components by repelling moisture and gunk.
- For extreme wet and muddy riding conditions. Works well in winter conditions as well (handles cold well)
- Improves shifting and extends chain life by repelling moisture and gunk
- Goes on wet, stays wet
- Does not contain wax
- Specifically developed for bicycles and thoroughly tested by WD-40 scientists in partnership with IBDs, pro bike mechanics, and pro cyclists

$5.43 - $147.15
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

$15.05 - $29.68
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

$10.15
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates.
- Specifically designed for lubricating chains
- Applicator is not included or needed because of the product's consistency

$269.95
You know that $300 carbon bar you just bought? Don't guess when installing it. Know exactly. Topeak's D-Torq is a precision digital torque wrench made from hardened steel. It features an audible alarm when you start to over tighten. The reversing rachet mechanism in the head has convenient thumb articulation and a range of 1-20 Nm. The LCD readout makes it easy to know exactly where you are and can calculate Nm/kg, Nm/cm, inch/lbs and foot/lbs.

$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally.
- Repairs large punctures and slices
- Reacts with Stan's sealant to form an instant, airtight seal
- Barbed plastic tip anchors into tire and will not pull out when riding
- Flexible material and laser-cut shape conforms to puncture and bonds with sealant
- Wears off clean, no trimming needed, and can not be felt while riding, even on road tires
- Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover
- Includes two pre-loaded DARTs for sealing multiple and larger punctures
- Clear caps keep DARTs clean and unthread quickly for fast deployment
- Simple and easy to refill

$39.99
When we launched Secret Chain Lube, Josh admitted that the starting point for this product was a hot wax recipe he had used for years with pro teams that had won numerous world and Olympic medals. The idea behind Secret Chain Lube was to bring this technology to a lube that didn't require hot melting, but it turns out many of our customers were already big fans of hot waxing chains, and the requests flooded in for us to release the SILCA Secret Wax Blend...so here it is!
Consisting of highly refined laboratory-grade paraffin and a high concentration of 3 specific sizes of nano-scale Tungsten disulfide, Secret Chain Blend not only acts as a lubricant but actually acts to modify the surface of the chain, filling in all of the crevices of the metal with highly lubricious and wear-resistant tungsten disulfide particles. As a result, chains waxed with Secret Chain Blend and Secret Chain Lube will actually get faster over time and after repeated waxings. Secret Chain Blend is the only hot wax lubricant to have a specifically matched and compatible drip wax that can be used to 'top off' the wax as needed, extending the duration between hot wax applications, and guaranteeing the quietest running drivetrain possible. Using the combination of Secret Chain Blend and Secret Chain Lube can dramatically extend the chain and drivetrain component life (up to 10x).
- 500g / 17.6oz pouch
- The chain should be VERY clean and dry before applying

$48.00
SRAM's Cable Cutter features sharp, spring-loaded diamond-shaped jaws and ergonomic handles to cleanly cut cables and housing every time. It also has jaws for crimping cable crimps and a hidden awl for opening housing ends after cutting, if needed. Plus, there's a safety to keep this fine tool closed when not in use.

$6.50 - $18.50
Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt.
- For road bikes only

$6.50 - $18.50
$8.99 - $18.50
Up to 28% Off
Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust.
- For mountain bike or wet road riding

$14.99 - $33.72
- Combines a powerful cleaning formula of solvents proven to be tough yet safe with strong 8" x 12" industrial strength, super absorbent, dual-textured towel
- Features a textured side for scrubbing and a smooth side for gentler applications
- Scrub the bicycle with the textured side then wipe clean with the smooth side
- Not for use on untreated carbon frames

$14.49
Universal spoke wrench designs are generally known for their low quality and awkward shape. The Pedro's Multi Spoke Wrench breaks this mold providing a shop quality spoke wrench in a compact, simple, ergonomic unibody design that feels good in your fingers and is perfect for the toolbox. Includes the three most common sizes.
- Made from heat-treated tool steel for strength and long-lasting performance
- Fits 3.2, 3.3, and 3.5mm spoke nipples

$34.99
To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

$10.95
Park's Hex Wrench Set offers all the popular Allen wrenches (1.5, 2, 2.5, 3, 4, 5 and 6mm) in a convenient fold-up unit. The tool tips are chamfered for a positive grip and the one-piece fiber-reinforced-resin handle is light, comfortable, slip resistant and 40% stronger than steel.

$8.95
12 splines, 22.6mm diameter fits Shimano, Sachs Aris, Sun Race, DNP Epoch, and other 5–10 speed freewheels. The FR-1.3 includes an enlarged thru-hole to accommodate 14mm axles.

$19.95
Park's Home Mechanic Pedal Wrench is great for your home workshop and event tool box. This top-quality 15mm pedal wrench provides the leverage you need to remove stubborn pedals. It's made to last from heat-treated steel, and the handle has a vinyl grip for comfort.

$7.95 - $13.95
World-famous Park Tool quality wrapped up in a great set of metric combination wrenches. Forged from chrome vanadium steel, chrome plated, meticulously polished, then center dipped in Park Tool blue vinyl for a positive grip.

$28.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

$28.95
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$64.95
The QTH-1 is an ergonomic T-handled bit driver equipped with eight common bits to fit a wide variety of fasteners and fittings found on bicycles. The magnetic "quick-change" handle allows for one-handed operation and makes changing bits quick and easy. The bit holder can be magnetically attached to any magnetic surface such as a repair stand or tool box, or can be permanently mounted to any wall or tool board. The QTH-1 is a professional-grade tool built to withstand the rigors of daily shop use and is fully rebuildable.
Includes the following magnetic 1/4" bits:
- 2mm, 2.5mm, 3mm, 4mm, 5mm & 6mm hex
- T25 Torx-compatible
- #2 Philips cross tip
- Bit holder includes empty spaces for 2 extra bits

$15.95
The BBT-16 removes and installs the self-extracting/one-key release caps on SRAM and RaceFace cranks with a 16mm hex hole. Features investment cast steel construction and an option to use 8mm hex for better leverage.

$429.95
Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

$26.99
- Muc-Off's 3 most popular brushes in an handy pack
- Claw brush ideal for chain, cassette and sprocket
- Detailing brush ideal for tight areas such as suspension mounts or fork crowns
- Soft washing brush ideal for your bike frame and wheels

$34.99
- Featuring all five Muc-Off brushes in a handy storage bag
- Claw brush ideal for chain, cassette and sprocket
- Detailing brush ideal for tight areas such as suspension mounts or fork crowns
- Soft washing brush ideal for your bike frame and wheels
- Wheel and component brush ideal to clean rim and spokes with ease
- Two-prong brush ideal to reach hard-to-shift dirt on your components
Page 1 of 3
Next page