Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$1.06 - $18.00 $4.25 - $18.00 Up to 75% Off
Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No
$3.00
BB30 Spacer - 15.46mm
$3.40
Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 10.1mm, for 3-pawl
$4.05
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$4.25
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.
$4.50
- Missing links to make chain installation, maintenance and reparation easier - Reusable up to 3 times - Compatible with 6, 7 and 8 speed IG drivetrains - Pin width: 7.1mm - Card of 2
$5.50
- Missing links to make chain installation, maintenance and reparation easier - Card of 2
$5.92
- Grade 10 chromium steel balls
$6.00
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.
$8.95
- Compatible with Super Record, Record, and Athena EPS systems - Required for use with the charger and works with V2 systems - USA/North America plug - adapters required for other countries
$9.95
Featuring a tasteful High Polish Silver finish with laser printed logo, this top cap perfectly matches the graphics on Classic stems for a clean, coordinated aesthetic. Compression bolt and plastic bolt cover are included. - Material: alloy - Includes top cap, bolt, and plastic cap - Fits with 1-1/8" stems - Weight: 8g
$9.99 - $15.90
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$10.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity
$10.00
Profile Design's UCM Universal Computer Mount provides a convenient 25mm long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
$10.99
40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets
$10.99 - $13.00 $13.00 - $14.00 Up to 21% Off
Shimano STI lever hoods. - Fits Ultegra ST-6700 levers only
$11.00
-Seatpost clamp for Defy/Avail Aluxx models (2015-2016)
$12.00
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction
$12.50
The Hope Center-Lock Lockring is designed for use with a center-lock disc rotor. - CNC machined - For use with axles up to 15mm - Compatible with rotors from other manufacturers
$12.50
The Hope Center-Lock Lockring is designed for use with a center-lock disc rotor. - CNC machined - For use with axles up to 15mm - Compatible with rotors from other manufacturers
$12.50
The Hope Center-Lock Lockring is designed for use with a center-lock disc rotor. - CNC machined - For use with axles up to 15mm - Compatible with rotors from other manufacturers
$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements
$12.99 $15.00 13% Off
FSA Compression Plugs are top assemblies for carbon steerers. Replaces the traditional top cap assembly. Includes cap, bolt, and expander. - Includes cap, bolt and expander - Top assembly for carbon steerers replaces traditional top cap and star nut assembly
$12.99
This is a bottom bracket adapter that works in conjuction with Origin8 Revolvr BB86/92 Thread-Together bottom brackets to create a PF121 Thread-Together bottom bracket. - Cup Material: AL6061
$13.99 - $21.95
The Problem Solvers Cross Hanger is the perfect front brake cable hanger for your cyclocross bike with cantilever brakes. Designed for easy installation and maximum braking power, this light, durable aluminum piece is a small but crucial part of your cantilever setup.
$15.99 - $26.99
Origin-8's Quill Adapter allows you to use modern threadless stems on bicycles with threaded forks that take quill stems (stems with bolts in the center). The Quill Adapter is made of light and durable 7075 aluminum and features a chromoly bolt.
$15.99
Shimano Front Derailleur Braze-On Adaptors allow you to run a braze-on style front derailleur on a frame that doesn't have a front derailleur braze-on mount. Multiple sizes cover fitment on most frames.
$15.99 - $17.99
Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts
$16.00
The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace
$17.00
Internal components for servicing the Reverb and Reverb Stealth mechanism.
$18.00
Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.
$18.00 - $23.00
Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts
$19.00
Shimano Rear Derailleur Pulley Assemblies
$20.00
A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.
$20.00
The AXS battery cover is a light-weight cowling designed to protect the battery while installed on the derailleur. The AXS Battery Cover fits all AXS mountain bike derailleurs.
$20.00
Replacement rear dropout Axle Stud Kit for Carbon V2 Beargrease, Warbird, and Warroad Frames. - Thread diameter and pitch: 12x1.5mm
$20.00
Replacement derailleur hangers for Salsa frames.
$20.00
Replacement derailleur hangers for Salsa frames. - Salsa Derailleur Hanger 687
$20.00
Whether for derailleur clamp clearance, tire clearance, or personal preference, sometimes it can be advantageous to run the wheel further back in the dropouts. Monkey Nuts install into Surly horizontal dropouts to make spacing the wheel back easy. There are 3 different sets depending on the type of dropout and axle configuration the dropout is intended for. Simply select the correct version of Monkey Nut, install it into the frame, and slam the wheel all the way forward. Bang, done.
$21.00
Replacement top caps for various RockShox suspension forks.
$21.22
Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks. ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable. Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Enduro Part # BB MR 2437 LLB-BLK - Imported - Sold in a bag of 2
$21.95
Roadlink Rear Derailleur Part - The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes - 11-42 or 10-42 setups are not supported - Works with all 10-11 speed Shimano and SRAM Road Derailleurs - Best used with Single or Double Setups - see manufacturer's site for more details
$22.00
- Includes stainless bolts - Fits 160mm front and 140mm rear rotors
$22.00
Disc Brake Adaptors - Includes Stainless Bolts
$22.00
Trigger Clamp/Bolt Kit For X0 X9 X7
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$22.00
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA
$22.45
Campagnolo EKAR disc brake adapters. - Includes bolts
$23.95
Campagnolo EKAR disc brake adapters. - Includes bolts
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$24.95
The precision-engineered Wolf Tooth Seatpost Clamp secures your seatpost and looks good doing it. At the heart of the Wolf Tooth Seatpost Clamp is a custom self-aligning bolt and anchor. The M5 bolt includes spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. - M6 stainless steel bolt with integrated washer - Tool interface - 4mm hex key
$24.99
Campagnolo Extra Parts - Watching this set of videos is highly recommended prior to installation - EPS components can only be purchased as a complete kit at this
$24.99 - $26.99 $24.99 - $26.99 Up to 7% Off
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.
$25.00
These simple rear pegs are the easiest solution for passenger footrests. XL 100mm length is large enough for passenger feet of all sizes. **For Globe Haul ST bike customers: Use of compatible (1) footrests (pegs), (2) passenger seat, (3) passenger handlebar, and (4) rear wheel cover required to safely carry passengers. All items available separately. ** - Designed for frictionless compatibility with the Haul ST and up to 2 pairs on Haul LT. - 100mm long. - Installation requires tools (not included). *Not compatible with Rear Pannier adapters on the Haul ST due to shared mounting location.
$26.00
Dimension Stem Column Adaptors - Total quill length 180mm - Measurement from minimum insertion to top of steerer adaptor is 118mm - Alloy - Quill insertion diameter: 1-inch
$27.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
Page 1 of 3 Next page